What To Consider When Repiping Your Home

Posted on April 18, 2013September 28, 2021 by chad siemer

Thinking about repiping your home?

A home is something that is the livelihood of many families. Making sure everything is working correctly around the home is something that is not always easy. Some people may be considering getting the water pipes throughout their home replaced. The water pressure in a home is extremely important for many of the appliances throughout it.

The washing machine will take longer to wash the clothes when the washer pressure is lower because it will take longer to fill it. The dishwasher may not clean or rinse the dishes well because of the low water pressure also. Some people get frustrated when they are trying to take a shower when there is not enough water pressure too.

There are many things that can cause a home to have low water pressure. A lot of people think that it is related to the water pump or to the well that the water is being drawn from. This is not always the case though. Sometimes the pipes that are run through the home are the culprit for this.

Most of the homes now have copper water lines running throughout their home. This kind was not always used though. The older homes may have steel pipes. These can rust while copper does not. Any kind of pipes can also leak when they are exposed to extremely cold temperatures which can cause them to freeze and crack. Fittings can also leak. All of these things should be checked.

If there are constant repairs to the water lines in the home, a homeowner may want to consider have the entire home repiped with PEX pipe rather than continuously repairing the existing ones. Even though the repairs are cheaper than replacing them at the time, in the long run, it will save the homeowner money and a lot of hassles. Not only does it save on the cost of the piping but it saves them money because the rest of the home is not getting water damaged.

Do you need to repipe your Orlando area home? Call Jeff’s Kitchen, Bath and Beyond today at (407) 968-1801 and make an appointment today!

Re-pipe With Pex Pipe In Orlando

Posted on April 9, 2013 by chad siemer

Repiping with Pex Pipe

Getting a property ready to sell typically involves cleaning, repairing minor items, and maybe some painting. However, if you live in Orlando, Florida, readying a property for sale can also mean that the property will have to be re-piped. The reason for this is that many properties built in Orlando in the early 80’s and 90’s contain polybutylene piping.

Twenty to thirty years ago, polybutylene was used in construction because it was cost effective and easy to install. The downside to polybutylene is that over time this piping will fail resulting in leakage and water damage. When it became apparent that polybutylene piping was failing, litigation ensued. As a result, properties containing this type of piping must now be re-piped in order to be sold.

There may be obvious and not so obvious signs that indicate that a property contains polybutylene piping. The piping itself is usually gray, blue, or black and has a diameter of an inch or less. Many property owners may not pay attention to the type of piping they have though. For them, the first sign of a problem is a rising water bill. Lower than normal water pressure may also indicate that a plumbing system is leaking. There may be soggy areas in the yard or higher than normal water runoff from the yard if part of the exterior system has failed. In the event of a major leak, substantial damage can occur to the interior of the property as well as to any personal items located within. Water spots on walls and ceilings and wet spots on flooring can also indicate possible problems. Furthermore, mold and mildew can also result from leakage and this can open the door for a host of health concerns as well.

For those needing to re-pipe a property that contains polybutylene, the question then becomes what product should be used to re-pipe. There are options such as copper and CPVC piping. However, the best option is Pex piping installed by a professional plumber. Pex is an abbreviation for a product known as cross-linked polyethylene.

Using Pex piping results in numerous advantages. One of the biggest is the flexibility of the piping. Greater flexibility makes Pex easy to install. The increased flexibility also results in fewer sharp turns in piping which in turn leads to better water pressure. Pex is also less expensive than alternatives such as copper. With copper theft being at an all time high, some in the scrap metal market have been known to steal copper. Since Pex is not a scrap metal, it is not very attractive to thieves. Pex is also less likely to develop the leaks than can occur with other piping systems. Finally, Pex can be used in conjunction with other piping through the use of special fittings.

Selling a property in today’s market requires making sure that the property is attractive, well-maintained, and without any system issues. For those trying to sell in the Orlando area, one system issue can be a plumbing system consisting of polybutylene piping. For property owners in this situation, professionally installed Pex piping is a great choice.

Repiping done right with Jeff’s Kitchen Bath & Beyond, call today for a FREE estimate 407-968-1801. Save $200 off your entire repipe job by mentioning the coupon below.

Signs That You May Need A Repiping In Your Home

Posted on April 3, 2013September 28, 2021 by chad siemer

It might be time to repipe your home

Like most homeowners, you probably don’t give much thought to the pipes in your home as long as your faucets run when you turn them on and your toilets flush when you pull the levers. Modern plumbing is efficient and requires little routine maintenance, so it’s easy to forget about the network of pipes that runs throughout your home. However, failing pipes are a serious matter. Leaky pipes can cause serious damage to your home’s structure and allow the growth of dangerous mold. Unfortunately, because your pipes are concealed within your walls, problems can go undetected. Sometimes it can be hard to tell when your home needs a repiping.

Often, the first sign of trouble is an unusually large water bill. Because leaks often start small and get larger over time, compare your current water usage with last year’s bill. Unexplained increases in usage are a good indicator that you have one or more leaky or broken pipes. To be sure, make sure all of your plumbing fixtures and appliances, such as toilets, taps, washing machines and dishwashers, are not being used. Don’t forget about less obvious things such as yard sprinklers or ice makers. Then check your water meter. If the meter shows water use when you aren’t using any, you almost certainly have a leak somewhere.

In most homes, shut-off valves for each fixture or appliance are located under or behind the units. Sink valves are often found inside vanities or sink base cabinets. Shut off all the valves, then check the meter again. If the meter is not running, the problem probably lies in one of your fixtures or appliances. Contact your plumbing professional for a quick resolution. If the meter shows that water is still flowing even with all the valves shut off, you probably have a more serious plumbing problem. Your home’s pipes will likely need to be repaired or replaced.

Other signs of failing pipes include damp or stale smells that indicate the growth of mold or mildew due to moisture from leaks. Chronic leaks may leave discolored areas on walls, especially in the corners and where the walls meet ceilings or floors. Water stains often have clear edges and may show streaks of gray or black. With a gloved finger, touch suspicious stains and look for the telltale shine of moisture on the latex. Black or colored spots or patches may indicate mold or mildew growth. Often, these signs hide in places you don’t often look, such as the insides of cabinets, closets and utility rooms.

When you need a reliable plumber to repipe your home, look no further than the Repiping pros at Jeff’s Kitchen Bath & Beyond. Give us a call today for free estimate. 407-968-1801